Staging Brakes

The Lamb Staging Brake System is designed to be used in lieu of an internal transbrake to improve the car's performance and consistency. The Staging Brake is especially effective on 3-speed transmissions, such as the Chrysler Torqueflite.

By providing a tremendous amount of rear-wheel braking capacity, the racer can leave the starting line by either releasing the foot brake or employing a line lock-type button an approach that produces much more consistent results. Once staged, the car cannot roll backwards out of the beam for inadvertent red-lights starts a common problem with conventional transbrakes.

By pre-loading the drive train and suspension components, the Lamb Staging Brake System not only produces more consistent launches, but reduces the wear and tear on the drive train parts as well as the transmission itself. The elimination of the transbrake takes away the possibility of accidentally activating the transbrake during the run which is an added safety factor.

The Lamb Staging Brake System is a compatibly-engineered kit that, when properly installed, allows the driver to achieve desired braking pressure with one depression of the foot pedal. The Lamb Staging Brake System also provides shut-down area stopping capabilities that cannot be matched by any system offered by other OEM or aftermarket manufacturers.



Model Product Image Item Name Price
#581E-LTWT Staging Brake Lightweight Kit (3.350" bearing)

Staging Brake Lightweight Kit (3.350" bearing)

For 3.350 bearing symmetrical end. This kit comes with #1602 calipers and lightened rotors.
$1,995.00

Add:

#581-LTWT Staging Brake Lightweight Kit (3.150" bearing)

Staging Brake Lightweight Kit (3.150" bearing)

For 3.150 bearing symmetrical end. This kit comes with the #1608 calipers and lightened rotors.
$1,995.00

Add:

#581E-Retro Staging Brake Retro Kit (3.350 bearing)

Staging Brake Retro Kit (3.350 bearing)

For 3.350 bearing symmetrical end. The Retro Kit includes #1602 calipers and lightened rotor.
$1,895.00

Add:

#581-Retro Staging Brake Retro Kit (3.150 bearing)

Staging Brake Retro Kit (3.150 bearing)

For 3.150 bearing - symmetrical end. This kit comes with the #1602 caliper and lightened rotors. Including: (4) Lamb billet calipers, (8) brake...
$1,895.00

Add:

#581 Staging Brake System HD Kit (3.150 Bearing)

Staging Brake System HD Kit (3.150 Bearing)

Including: (4) Lamb billet calipers, (8) #725 brake pads, (2) rotors, (2) billet rotor adapters, (2) dual caliper Lamb mounting brackets, plumbing...
$1,795.00

Add:

#581E Staging Brake System HD Kit (3.350 Bearing)

Staging Brake System HD Kit (3.350 Bearing)

Including: (4) Lamb billet calipers, (8) #725 brake pads, (2) rotors, (2) billet rotor adapters, (2) dual caliper Lamb mounting brackets, plumbing...
$1,795.00

Add:

#581-O HD Staging Brake System for Olds/Pontiac housing ends

HD Staging Brake System for Olds/Pontiac housing ends

Including: (4) Lamb billet calipers, (8) #725 brake pads, (2) rotors, (2) billet rotor adapters, (2) dual caliper Lamb mounting brackets, plumbing...
$1,795.00

Add:

#581-O-Retro Retro Staging Brake System for Olds/Pontiac housing ends

Retro Staging Brake System for Olds/Pontiac housing ends

Including: (4) Lamb billet calipers, (2) rotors, (2) billet rotor adapters, (2) dual caliper Lamb mounting brackets, plumbing kit between calipers.
$1,895.00

Add:

#581-LTWT-MV4 Staging Brake Kit LTWT M/W EV4

Staging Brake Kit LTWT M/W EV4

Staging Brake Kit Lightweight M/W EV4. Including: (4) #1608 Lamb billet calipers, (8) brake pads, (2) rotors, (2) billet rotor adapters, (2) dual...
$2,075.00

Add:



Your IP Address is: 54.227.51.103
Copyright © 2017 Lamb Components. Powered by Zen Cart